Seleccionar Tarjeta Sonido

[EB4BZA]

¿Cómo puedo seleccionar la tarjeta de sonido instalada con la que trabajar en modos digitales a través de GRG Desktop?

El programa funciona correctamente utilizando la tarjeta de sonido por defecto del ordenador, pero hay determinadas emisoras como el IC-7300 que crea una tarjeta de sonido virtual propia. En ese caso, desconozco el método para indicar a GRG Desktop que utilice dicha tarjeta, dado a que en el manual no viene descrito y tampoco veo ninguna opción en el propio programa para seleccionarla.

Muchas gracias y un saludo.

[EA1IMW]

Una vez que conectas el 7300 o cualquier equipo similar, es decir, que crea una nueva tarjeta de sonido, deberás de acudir a la configuración de Windows y seleccionarla como predeterminada; luego inicias GRGDESKTOP normalmente y debería de funcionar sin problemas siempre que hayas realizado las configuraciones necesarias en el propio equipo de radio.

[VK2IE]

[quote pid='841' dateline='1631181238']
EA1IMW Once you connect the 7300 or any similar computer, that is, it creates a new sound card, you must go to the Windows settings and select it as the default; then you start GRGDESKTOP normally and it should work without problems as long as you have made the necessary configurations on the radio equipment itself.
[/quote]

ch help.I have the configured the COM Port. I can T/R the rig. Just do not see where I configure the sound card on the program. I would be appreciated to advise how to select the appropriate input as the program is currently connected to my microphone. Not much help.

[EA1IMW]

[quote pid='841' dateline='1631181238']
EA1IMW Once you connect the 7300 or any similar computer, that is, it creates a new sound card, you must go to the Windows settings and select it as the default; then you start GRGDESKTOP normally and it should work without problems as long as you have made the necessary configurations on the radio equipment itself.

ch help.I have the configured the COM Port. I can T/R the rig. Just do not see where I configure the sound card on the program. I would be appreciated to advise how to select the appropriate input as the program is currently connected to my microphone. Not much help.
[/quote]

The sound card must be selected from the configuration of the operating system itself. The program will use the default audio device.